Keywords: UHMWPE Sheet, UHMWPE Profiles, HDPE Sheet, HDPE Profiles
+86 131 7333 7240
Keywords: UHMWPE Sheet, UHMWPE Profiles, HDPE Sheet, HDPE Profiles
+86 131 7333 7240
dewatering elements
suction box cover
dewatering elements for paper machine
dewatering elements for paper and pulp mill
paper machine dewatering elements
Description
UHMWPE dewatering elements(suction box cover)
XINXING UHMWPE suction box covers and blades are made of UHMW-PE material .
UHMW-PE dewatering element is known for its high dry-film lubricant content.
This produces an extremely smooth surface, most importantly resulting in a low friction
coefficient a low level of adhesion. No adhesion Excellent chemical resistance
For machines with speeds up to 800 m/min
XINXING dewatering elements in ultra high molecular weight polyethylene set themselves apart by the special
sinter press procedure over a long period used to produce them, as well as an extremely high molecular weight
plus their extra additive that is specifically tailored to paper machines.All these benefits ensure what is an
outstanding service life for plastic coupled with a low coefficient of friction.
advantages:
The measured co-efficient of friction for material is 0.08 which compares very favouralby with other plastics
where the friction is between 0.16 and 0.20,or cross grain wood of 0.3.
Faster machine speeds can be achieved through the low coefficient of friction.˙ Less motive power required to
drive machines.
The material has a high impact strength and cannot break or splinter . Temperature resistent to 1000C.
Size: suction box cover, made to your specification to the max.
Length is 1200mm, width is 1000mm, thickness is 60mm
Other size can be processed.
Color: White, yellow, blue, orange, green etc, other color can be customized.
Application
On paper and pulp industry
At machine speeds of up to approx. 800 m/min
Assembly
UHMWPE dewatering elements for paper machines have a high level of thermal expansion. They must therefore be
installed in such a way that enables the strips or covers to expand without restriction (T-bars, corner strips,
dovetail guides, screws in elongated holes). The base frame support must have a grid of approx. 250 mm to ensure
flawless functionality for our covers. This support must extend to the underside of the cover to ensure it has a flat
installation surface.
Size
1200x1000x60mm
3000x500x60mm
3000x500x50mm
3000x500x40mm
maximum length can be 6000mm
maximum width can be 2000mm
thickness can be 40mm, 50mm and 60mm
Color
white, black, blue
Applications
On paper and pulp industry
At machine speeds of up to approx. 800 m/min
Navigation
Mob.: +86 131 7333 7240
Phone: +86 534 5222 377
Fax: +86 534 7074 626
E-mail: [email protected]
Sype: sdxxhg518
WhatsApp: +86 131 7333 7240
Address: Liaohe Road, Ningjin Industry Zone, Dezhou City, Shandong, China
Follow Us
